Uniden BCD436HP Two-Way Radio User Manual


 
25
information included, the range setting will have no effect on them because the scanner
doesn’t know where they are.
2. You will receive Departments/Sites that have a range equal to your scan range setting plus
the programmed range of the Departments and Sites. For example, if your scan range is set
to 10 miles and a Department/Site range is set to 30 miles, and that Department/Site is less
than 40 miles away from your current location setting, it will be enabled in your Favorites List
according to both range settings.
3. If you use Add Current dB Channels from a list with a 10 mile range (selected location by
zip/postal code) and then set the range to 20 miles, Location Control will not add the other
channels included that extra 10 mile range.
EDIT LOCATION
This allows you to create a location or edit a location for rapid recall.
New Location or Edit Location
Edit Name. See Data Naming.
Use Location. This will set the location as current for scanning the Database and
Favorites Lists with Location Control enabled.
At Conrm? Press E/yes or ./no.
Delete Location. You can only delete saved locations. The last location set will be
retained for use when scanning the Database.
At Confirm Delete?, press E/yes or ./no.
Set Location Information. See Set Manual Location.
Set Range. Enter the range (0-50) and press E/yes.
Save Location – This will save the current location, the range, and set the location as current for
scanning the Database and Favorites Lists with Location Control enabled.
See Data Naming to name the location.
SELECTING SERVICE TYPES
Not all service types are enabled when you set your location in the scanner. By default only EMS
Dispatch, Fire Dispatch, Law Dispatch, Custom 1, and Multi-Dispatch are enabled.
The Appendix has a list of Service Types and their general descriptions.
(BCD536HP) Press the Serv button.
(BCD436HP) Press Func then the Zip/Services button.
Scroll to each Service Type and press E/yes to enable or disable.
Press System to exit.
When the scanner displays a Service Type that is not in the Favorite Lists, the scanner will display
a “---” indication.