Filter
Top Products
REMOTE OPERATION
29
NOTE: • An outgoing message must be recorded before you can
remotely set the 7500AI to answer calls.
• For New Zealand model, the 7500AI remains off even after 15 rings.
REMOTE OPERATION
You can operate the 7500AI from any remote location using a touch-tone
phone, or from a rotary phone using a pocket tone-dialler.
Call your telephone
When you hear the OGM, enter your security code. After a long beep, enter
your remote command code(s).
If you do not hear an OGM, the unit is either in Answer-off mode or is not
setup properly.
Automatic 7500AI Switch On (for Australian version only)
• Call your telephone (After 15 rings you will hear the 7500AI play your
OGM1 or OGM2)
• Your 7500AI is now ready to answer calls