Filter
Top Products
BASIC OPERATION
BASIC OPERATION
RECORDING INCOMING MESSAGES
The maximum incoming message recording length is 60 seconds. When a
recording reaches 55 seconds, the 7500AI beeps once to notify the caller that
time will soon be up. When the recording reaches 60 seconds, the 7500AI
sounds one long and four short beeps, and plays "Thank you for your call",
then hangs up. While the incoming call is being recorded the display shows:
The 7500AI hangs up and resets to
answer the next call when:
• The caller hangs up.
• The maximum message length
(60 seconds) is reached.
• There are more than 8 seconds of silence.
If the 7500AI’s memory is full, it will answer
the call after the set number of rings then
play the announcement only message
(OGM2). The display shows:
If no OGM2 is recorded, the 7500AI announces "Message is full, thank you
for your call". Please delete some messages to restore normal operation.
PM
CALL
#
NEW
OGM1 OGM2 ANS ON
88 MSG FULL
PM
CALL#
NEW
OGM1 OGM2 ANS ON
ICM RECORDING
17
NOTE: OGM 2 indicator on the display continuously flashes if OGM 2 has
not been recorded