Toshiba Strata CT Telephone User Manual


 
42
Strata CT Standard Telephone User Guide November 2001
Type Approval Notes to Users
Step 3: Type Approval
Toshiba Information Systems (UK), Ltd, (TIU), hereby declares that the Strata CT product complies
with the requirements of the EC Directive 1999/5/EC, (aka Radio & Telecommunications Terminal
Equipment directive). A manufactures Declaration under this Directive allows connection to the
relevant Public Network Services and the right to place the Product on the market.
The Strata CT is classified as Call Routing Apparatus it is intended to be connected to the various
Public Telecommunications Network Services for the purpose of generating and terminating calls.
Table A2 below lists the intended purposes of all the system interfaces.
The system must be installed in accordance with BS6701 parts 1 and 2, the latest issue shall apply.
Toshiba Information Systems claim approval to OFTEL general variation NS/V/1235/P/100020. The
information contained in this paragraph supports Toshibas claim:
The following features require the interconnection of 2 or more exchange lines.
Multi-party conferencing
Call Forward External*
Translation of Un-used Extension numbers*
DISA*
*Warning! These features can allow an Incoming callers access to an outgoing exchange line. There is
an engineering programming parameter which can disable these features. In addition the
DISA feature can be “password” protected. USERS SHOULD BE AWARE THAT THESE
FEATURES CAN BE USED FOR FRAUDULENT PURPOSES. Please consult your supplier
to ensure any necessary security measures are enabled.
Table A2
Interface Type Network Service
PCOU2F/RCOU3F/RCOS3F Analogue Loop Calling Unguarded Lines
RPTU1F Euro ISDN30 service. Approved to CTR 4.
RBSU1A & RBSU2A Euro ISDN2 service. Approved to CTR 3.
PACU2F Analogue 4 wire Private Circuits, uses AC15 signalling. Approved to TBR 17.
PEMU2F Analogue 4 wire Private Circuits, uses DC5 signalling. Approved to TBR 17.