Filter
Top Products
14
Strata CT Standard Telephone User Guide November 2001
Call Park Orbits Features
Call Park Orbits
The Call Park feature enables you to hold a call temporarily in an orbit (the area where the call is
held). Anyone can retrieve the call from the orbit using the same or a different station. There are 20
General Park Orbits for the system and 1 Personal Park Orbit for each station.
Once you have parked a call in an orbit, you can:
♦
Hang up and retrieve the parked call at a later time
♦
Originate another call
♦
Access a voice paging device to announce the parked call for pickup from another station
➤
To Park a call
1. While on a call, flash the
hookswitch or press your
recall button.
You hear dial tone.
2. Press
#332
.
3. Enter a General Orbit Number
(
900~919
) or [PDN].
You hear a one second confirmation tone. The call is
parked at the orbit or to an assigned [PDN]. If an orbit
number is busy, enter another number.
4. Hang up. Once the call is parked, you can make or receive other
calls.
Notes
●
If the parked call is not retrieved within a specified
time, the call rings back to your phone.
●
If your phone is busy when the parked call recalls,
you hear two tones of two short beeps, three seconds
apart. You can place the new call on hold and answer
the parked recall or end the second call and answer
the parked recall by hanging up. The parked call
remains camped onto your phone until you respond.