Filter
Top Products
2
Strata CT Standard Telephone User Guide November 2001
Before You Begin Features
➤
To Flash the hookswitch
Some Exchange line features, such as conferencing or behind PBX operation require “flashing the
Exchange line,” to then dial the PBX feature access code or extension numbers.
➤
To flash an Exchange line
Incoming Call Ringing Patterns
Your telephone ringing pattern is set in system programming.
Some systems may use the internal call ring pattern—one second ON, three seconds OFF—for
incoming outside calls.
A distinct outside call ring pattern—0.4 seconds ON, 0.2 seconds OFF, 0.4 seconds ON, three seconds
OFF—is available.
➤ While on a call, flash
(press) the hookswitch
down about 1/2 second,
then release it.
You hear dial tone after flashing the hookswitch. Some
telephones may have a special button which flashes the
hookswitch.
Note The hookswitch is located in the handset cradle of your
telephone.
1. Momentarily press the
hookswitch for about 1/2
second or press your
recall button.
After you press the hookswitch or recall, you hear dial tone.
This hookflashes the Toshiba system only.
2. Press
#45
. You hear PBX dial tone.
3. You can now dial a PBX
feature access code or
extension number.