Filter
Top Products
Strata CT Standard Telephone User Guide November 2001
11
Features Call Forward
Remote Call Forward—External Destination Change
If Call Forward-External mode is set at your station, you can change the forwarding destination from
a telephone outside of the system.
The destination is normally an external Public Telephone Network Number, but it can also be an
internal Directory Number.
➤
To change the destination number
1. Call into the Strata CT
system over an Exchange
line programmed for the
DISA feature.
You hear ring back tone signal, then internal dial tone for
10 seconds. Try again if you hear busy tone.
Note See the System Administrator for DISA telephone
numbers.
2. After you hear dial tone,
press
#670
, then enter a
[PDN].
You hear a confirmation tone.
If a number is not dialled, the system automatically causes
the DISA Exchange line to ring at telephones as a normal
incoming call. Then, if the call is not answered within 15
seconds after the ringing starts, it disconnects.
3. Enter the Remote Call
Forward-External security
code.
You hear a confirmation tone. See the System
Administrator for the access code.