Filter
Top Products
Strata CT Standard Telephone User Guide November 2001
19
Features Conference and Tandem Calls
Conference and Tandem Calls
Standard Telephones and/or Voice Mail Auto Attendant Devices
Strata CT enables you to participate in a variety of conference calls:
♦
Up to four stations (including your own) may be conferenced on internal lines.
♦
Up to three stations (including your own) may be conferenced with one Exchange line.
♦
Up to two stations (including your own) may be conferenced with two Exchange lines.
Step 1: Make a Conference Call or Tandem Two Exchange Lines
1. While on either an external
call or internal call, flash the
hookswitch or press your
recall button.
You hear internal dial tone and the call is placed on hold.
You will not hear the held party again until Step 4.
2. (Optional) If you want to
add an outside line, dial the
Exchange line access code;
otherwise proceed to Step 3.
See Table 1 on page 36 for Exchange line access codes.
You hear dial tone when the line is accessed. (Up to two
Exchange lines can be conferenced.)
3. Dial the telephone number
that you want to add to the
call.
4. If you hear a single tone,
voice announce the call and
ask the party to pick up
On internal calls, the new party must pick up the handset
or press a [PDN] button to participate in a conference call.
...or, if you hear ringing,
announce the call once the
party answers
...or, if the called station is
busy, you can flash the
hookswitch or press your
recall button to return to the
existing call.
Note If a called external number is busy, you must hang
up and re-initiate the call.