Filter
Top Products
Strata CT Standard Telephone User Guide November 2001
25
Features Message Waiting
➤
To answer a Message Waiting light
➤
To cancel the Message Waiting light
Note If it was voice mail that lit your message waiting LED, it will automatically turn off your
LED as soon as you retrieve your messages.
Set Message Waiting On Other Telephones
After reaching a busy or unanswered telephone equipped with a Message Waiting indicator, you can
set a Message Waiting indication on the called telephone. A flashing lamp or LED at the called
telephone indicates a call is waiting. The station user can press the button associated with the flashing
LED or enter
#408
to call you back.
➤
To set a message waiting indication on another telephone
1. Lift the handset. You hear dial tone.
2. Press
#408
. Your phone rings the device that set the indication. If there
is no answer, hang up and try later. (The LED continues to
flash.)
3. If your telephone calls a busy
station or there is no answer,
hang up and try later.
The LED continues to flash.
...or you can bypass this
message and listen to the next
message by going on-hook
and repeating Steps 1 and 2.
4. After receiving the message,
hang up.
If the Message Waiting LED continues to flash, you have
more messages—repeat Steps 1~3 to retrieve them.
1. Lift the handset. You hear dial tone.
2. Press
#409
The Message Waiting indication is cancelled.
1. If a called telephone station is
busy or does not answer,
press
7
77
7
.
A Message Waiting light is set at the station. If you are
calling a standard telephone, the telephone must have with
a message waiting light. All Toshiba digital or electronic
telephones have Message Waiting lights.
2. Hang up.