Filter
Top Products
Strata CTX Standard Telephone User Guide October 2002
25
Advanced Operation
Speed Dial
Store a Station Speed Dial Number
➤
To store a Station Speed Dial Number using an Access Code
1. Dial
. You hear Entry Tone.
2. Dial the Station Speed Dial number (100~199). You hear Entry Tone.
Note
Selected telephones may have the ability to change System Speed Dial numbers. Follow this
procedure, but specify a System Speed Dial number (200~999) instead.
3. Enter the destination digits, then press
. You hear Success Tone.
4. Release the phone. To enter another number, repeat the process, starting with Ste p1.
CTX System Administration
The third method of storing station Speed Dial numbers is via your CTX System Administrator, who
can establish your Station Speed Dial number through administrative software and associate a name
with it.
Advanced Speed Dial Operation
Special Characters
Speed Dial Numbers may include
~ , , and Pause. When using the Access Code input method
(see above) it is also necessary to use
to indicate you have finished entering the destination number.
This creates 14 functions to be input from the 12 buttons on the dial pad.
Long Speed Dial Numbers
Speed Dial Numbers are stored sequentially in memory areas capable of holding 32 digits. If you
exceed 32 digits, the excess are stored in the next higher area and consume the next sequential Speed
Dial Number.
You can dial the entire string by entering the original Speed Dial Number and all digits will be sent,
including those in excess of 32. If that were Speed Dial Number 100, Number 101 would no longer be
available. You are not prevented from storing a new Number 101 but, if you do, Number 100 will be
shortened to 32 digits.