Filter
Top Products
4
Strata CTX Standard Telephone User Guide October 2002
Call Transfer
The Basics
Call Transfer
1. While on a call, press . You hear internal dial tone.
2. Dial the extension where the call will be transferred. You can remain on the line and announce the call
or immediately “blind transfer” the call.
During call transfer, you can connect all three parties by pressing
.
♦
If you get voice mail, you can leave a message or hang up and let the transferred caller leave
a message.
♦
If you hear a long single tone, then announce the call over the called phone’s speaker.
3. Transfer with Camp On: If the station to which you want to transfer the call is busy, you may hang
up and the transferred trunk or station will be camped on to the busy destination.
➤
To transfer a call directly to Voice Mail (VM)
1. While on a call, press
.
2. Enter
.
3. Enter the VM mailbox number (usually the same as the extension number).
4. Hang up (the caller is connected to the VM mailbox) or, you can press
to return to the calling
party.