Filter
Top Products
14
Strata CTX Standard Telephone User Guide October 2002
Call Park Orbits
Advanced Operation
Call Park Orbits
The Call Park feature enables you to hold a call temporarily in a location other than your telephone.
These areas are called orbits. You or another telephone user can retrieve a parked call from its orbit by
specifying the orbit number. You can specify one of 20 General Park Orbits (7000~7019) or a valid
extension number within the system.
Once you have parked a call in an orbit, you can:
♦ Hang up and retrieve the parked call at a later time
♦ Originate another call
♦ Access a voice paging device to announce the parked call for pickup from another station
If you park a call and it is not retrieved, it will recall to the parking station and one of the following
occurs:
♦ If your station is idle when the system Call Park recall timer expires, the parked call automatically
recalls to your station.
♦ If your station is busy, the parked call camps on.
➤
To park a call
1. While on a call, press
+ .
2. Specify the Park Orbit by doing one of the following:
♦
Enter a valid extension.
♦
Press and the system automatically selects your extension as the orbit.
If the analog hold feature is set in programming, the line LED will flash on other telephones,
which enables the call to be picked up from another telephone.
3. Hang up. If the parked call is not retrieved within a specified time, the call rings back to your phone.
➤
To retrieve a parked call
1. Lift the handset, press
.
2. Enter the Orbit Number where the call is parked or
to enter the extension from which you are
calling.