Filter
Top Products
QUICK
REFERENCE
GUIDE
Read the Owner’s Manual for details.
CALLER ID CORDLESS TELEPHONE
SG-1600
SG-1800
UCZZ69701BA RC009261 Printed in China
SETTING UP THE BASE UNIT
CHARGING THE BATTERY PACK
Red
Black
SETTING THE AREA CODE
SELECT
3
FUNCTION
MAKING A CALL
ANSWERING A CALL
TALK
TALK
Dialpad
1
When a call is
received,
“Incoming call”
appears on the
LCD.
2
Press
TALK
to
connect.
3
To hang up, press
TALK
or place
the handset on the
base unit.
1
Key-in the phone
number (max. 32
digits).
2
Press
TALK
.
3
To hang up, press
TALK
or place
the handset on
the base unit.
1
Press
FUNCTION
, then press
3
.
2
Press
SELECT
and enter a 3-digit area
code.
3
Press
SELECT
, then press
FUNCTION
.
1
Remove the battery compartment cover by sliding it
down.
2
Plug the battery pack cord into its socket, observing
the correct polarity.
3
Insert the battery pack . Then close the battery
compartment cover.
4
Place the handset on the base unit. You can place
the handset with the dialpad facing up or down.
IMPORTANT
Charge the battery pack for at least 12 to 16 hours.
CALLER ID SERVICE
To use this feature, you must subscribe to the Caller ID service provided by your telephone company.
1
Press
CID
, then press or to display
the number you wish to dial.
2
Press
TALK
.
The displayed number will be dialed.
Deleting Caller ID data
1/7 9:30AM 12
SMITH JOHN
456-7890
Storing Caller ID data to Speed dial memory
Caller ID on Call Waiting
1
Press
CID
, then press or to bring
up the number you wish to store into Speed
dial memory.
2
Press
MEM
. “Select Location” appears on
the LCD.
3
Press , or enter a memory location
number on the dialpad.
4
Press
SELECT
. A confirmation beep
sounds and the Caller ID data is stored.
Press
CID
to return to standby mode.
,
CID
SELECT
MEM
1
Press
CID
, then press or to display the
Caller ID number you wish to delete from the memory.
2
Press
DELETE
.
Press
or to select Yes or No.
3
Press
SELECT
or
DELETE
. If you select Yes, a
confirmation beep is emitted and the LCD displays
the next Caller ID data. If there is no more Caller ID
data, the LCD displays the message “END”.
If you select No, the LCD returns to the Caller ID data
screen.
4
Press
CID
to return to standby mode.
,
CID
SELECT
DELETE
TALK
4567890
Delete Message?
s
Yes
No
For more detailed instructions and examples, please refer to the owner’s manual.
TALK
,
CID
Making a call with Caller ID data
To use this feature, you must subscribe to the Caller ID on Call Waiting service provided by
your telephone company.
FLASH
1
Before answering a call, check to see that the
caller’s name and telephone number are displayed
on the screen. To switch to the waiting call, press
FLASH
.
The first caller is put on hold.
2
To switch back to the first caller, press
FLASH
again.
Note:
For long distance calls, you need a prefix “1” and the area
code. Press
L.D./1
and
LOCAL/3
to add “1” and the
area code before press
TALK
.
Telephone Line Code
AC Adaptor
Single-Line
Telephone Jack
(RJ11C)
Power Outlet
(AC 120V, 60Hz)
Fasten the AC
adaptor cord.
Charging contacts
IN USE/
CHARGE
LED
Set the TONE/PULSE switch for the type of dialing service you have.
Raise the
antenna to
vertical position.