Filter
Top Products
33
Caller ID/Call waiting
CALLER ID/CALL WAITING
STORING TO SPEED DIAL MEMORY
1 Pick up the handset and press . Then, press or
to bring up the number you wish to store into Speed Dial
memory.
2 Press .
The LCD displays the following screen.
3 Enter a two-digit number (01-20) or press
,
to select
memory location.
4 Press . A confirmation beep sounds and the Caller ID data
is stored. Press to return to standby mode.
If you select a memory location which is already stored:
(1) The LCD displays the following prompt:
(2) Press to select and press
.
A confirmation beep sounds and the new data overwrites the
old data. The LCD returns to the Caller ID display screen.
If you select :
The LCD returns to the Caller ID display screen.
Press to return to standby mode.
CID
SELECT
CID
SELECT
MEM
CID
Select Location
01
ss
02
Replace Memory?
Yes
ss
No
Wall mount template
IMPORTANT:
Before mounting, select a wall area of sufficient
strength. If mounting on wallboard or in an area
of questionable strength, locate a stud for
maximum support of your telephone.
Avoid electrical cables, pipes, or other items
behind the mounting location that could cause a
hazard.
CUT CUT
•
•
*SG-1800.qx 7/11/0 7:04 PM Page 33