Filter
Top Products
23
Basics
MEMORY DIALING
You can store up to 20 telephone numbers and their associated
names in the memory.
You can program them yourself or transfer them from the Caller ID
memory.
NOTES:
• Always press a button within 20 seconds after pressing the previous button.
Otherwise, the setting procedure will be canceled and the handset is put in
standby mode.
• If you press a wrong button, an error tone sounds and the handset returns to
standby mode.
• If you receive an incoming call or a pager call from the base unit or you press
or charge the handset during the operation, the operation will be
cancelled.
STORING NUMBERS
You can store up to 20 digits including #, , and PAUSE as a
telephone number, and up to 13 characters as a name in one memory
address.
1 Pick up the handset and press and hold
till a beep sounds.
The LCD displays the memory dial list
beginning the location number 01.
2 Enter a two-digit number (01-20), or press
,
to select a free memory location
number.
Example: Selecting memory location number 07
3 Press . The LCD displays the
following screen.
SELECT
MEM
TALK
Memory Store
01
ss
SMITH JOHN
02 DOE JOHN
Memory Store
07
ss
08
MEM
DELETE
SELECT
,
Store Name
*SG-1800.qx 7/11/0 7:03 PM Page 23