Filter
Top Products
14
INSTALLATION
SETTING THE TONE/PULSE SWITCH
Set the TONE/PULSE switch to TONE.
If the call does not connect with the TONE setting, set the
TONE/PULSE switch to PULSE.
SETTING OR CANCELING THE AUTO TALK FUNCTION
If the handset is placed on the base unit, you can answer a call by
simply lifting the handset from the base unit (Auto Talk). If the handset
is not on the base unit, you can answer a call by pressing any one of
the buttons (Any-key Answer function). When the Auto Talk function is
set to ON, the Any-key Answer function is also set to ON.
When the Auto Talk function is set to OFF, you can lift the handset and
view the caller ID information before choosing to answer. This function
is preset to OFF at the factory prior to shipment.
1 Press . The LCD displays the
current setting.
2 Press . Each time you press ,
the On/Off setting will be switched.
3 Press . The handset is put in
standby mode.
FUNCTION
SELECT
SELECT
FUNCTION
TONE/PULSE switch
SELECT
FUNCTION
1
ss
Auto Talk:Off
2 CIDCW :On
3 Area Code:
1
ss
Auto Talk:On
2 CIDCW :On
3 Area Code:
*SG-1800.qx 7/11/0 7:03 PM Page 14