Filter
Top Products
ATI Presentation Pack
User's Manual 11-4
TOSHIBA Pocket PC e750
Version
1
Last Saved on 02/05/2003 17:16
ENGLISH using Euro_M.dot –– Printed on 02/05/2003 as HDA51PX1T80
You can project the currently selected slide to VGA Display by activating
the VGA Slide Toggle command on the View Menu, or by tapping the
VGA Slide Output Toggle icon at the rightmost side of the Toolbar. To
end the projection, select the command again to toggle it off.
Slide Sorter
Slide Sorter view fills the entire application space with either large or
small thumbnails, depending on whether Large Thumbnail or Small
Thumbnail is active on the View Menu. You can select:
One slide by tapping on it, or
Multiple adjacent slides by dragging your stylus over them, or
If you select Multiple Select Mode on the Edit Menu, you can tap,
drag, or a combination thereof, to select multiple slides that are
separated.
Selected slides will be highlighted by a different border color.
You can project an individual slide to the VGA output by activating the
VGA Slide Toggle command on the View Menu, or by tapping the VGA
Slide Output Toggle icon at the rightmost side of the Toolbar. When you
activate this function:
If one slide is selected at the time you toggle the VGA Slide Output
“on,” that slide will be output to the VGA Display.
If multiple slides happen to be selected, the first selected slide in the
sequence will be output to the VGA Display.
If no slides are selected, there is no change to the current status of
the VGA Display. That is, if an image is already displayed on the VGA
Display, that image remains until you select a slide on your LCD
screen for projection.
To end the projection and return to viewing the slide only on your mobile
device’s screen, just select the command again (or tap the icon a second
time) to toggle it off.
Indicator Icons under Thumbnails
Under each thumbnail in Slide Sorter view mode, there may be various
small icons displayed which indicate the status/attributes of the slide, as
follows:
The transition icon indicates that a transition effect has been associated
with the slide, and tapping the icon will “demo” the transition effect.
The shape icon indicates that the slide contains animated shapes.
If you assigned a transition delay-time to the slide in the Automatically
field of the Edit Menu > Slide Transition... screen, the delay- time will be
shown.
The slide number is always shown at the right. If the slide has been
hidden using the Hide Slide command on the Edit Menu, the slide
number will be enclosed in a red box with a line crossing it out.