Filter
Top Products
62 63
Memory full
If a caller is leaving a message when the memory becomes full your machine will announce, “Memory
full thank you for calling” and hang up. The machine will also automatically set to Answer Only, the
base indicator will flash F and the handset display will show Ans. mach full. You must delete
messages before you can receive any new ones.
Remote access
Security PIN
You can operate your answering machine from any modern phone by calling your Telstra 7300a and
entering a 4-digit security code.
The pre-set code is 0000. You must change the code from 0000 to another 4-digit number to enable
remote access.
Set/change remote access security PIN
1. Press
8PY`
scroll to Ans. machine menu and press
8PY`
.
2. Scroll
.LWW^
or to Security PIN and press
8PY`
3. Enter the current 4 digit PIN (default setting = 0000) and press
8PY`
4. Enter the new PIN and press
8PY`
.
5. Enter the new PIN again and press
8PY`
.
6. Press
8`_P
to return to standby.
Using the answering machine (7300a only)
During playback:
Stop/Play press
,-.
Repeat current message press
234
Play previous message press
234
, twice
Delete current message press
567
Skip forward to next message press
89:
!
3. Press and hold
8`_P
to return to standby.
Delete all old messages
You can only delete messages that have been played. Any new, unplayed, messages will not be
deleted
1. Press
8PY`
scroll to Ans. machine menu and press
8PY`
.
2. Scroll
.LWW^
or to Del. all old and press
8PY`
.
3. Press
8PY`
to confirm.
4. Press
8`_P
to return to standby.
Call screening
You can listen while your answering machine takes a call via the handset or the base speaker. This lets
you identify the caller and decide whether to take the call yourself.
1. When the answering machine takes a call it can be heard through the base speaker. Screen? also
appears on the handset and pressing
8PY`
allows you to hear your caller leaving their message.
2. To speak to your caller, press or . Recording stops automatically.
Using the answering machine (7300a only)