Filter
Top Products
42 43
Handset settings
Handset tones on/off
Your Telstra 7300/7300a has a series of tones designed to alert you to certain situations. A tone will
sound: when the battery is low; when you move out of range of the base and there is no coverage; to
confi rm each button press (key beeps). You can switch the handset tones on or off.
1. Press
8PY`
to open the main menu.
2. Press
.LWW^
or until the display shows Setup h/set and press
8PY`
.
3. Press
.LWW^
or until Warning Tones is displayed, press
8PY`
to select.
4. Press
.LWW^
or to select the tone you want and press
8PY`
to select.
5. Press
.LWW^
or to display either On or Off and press
8PY`
to confirm.
6. You hear a confirmation tone and Saved is displayed.
7. Press and hold
8`_P
to return to standby.
Handset name
You can give each handset a name up to a maximum of 11 characters, for example “Kitchen”. It will still
display its number.
1. Press
8PY`
to open the main menu.
2. Press
.LWW^
or until the display shows Setup h/set and press
8PY`
.
3. Press
.LWW^
or until Handset name is displayed, press
8PY`
to select.
4. Press
8`_P
to delete characters and use the keypad to enter the name you want, then press
8PY`
to
confirm.
Handset settings
Ringer melody
There are 6 different ringer melodies to choose from.
1. Press
8PY`
to open the main menu.
2. Press
.LWW^
or until the display shows Setup h/set and press
8PY`
.
3. Ring melody is displayed, press
8PY`
to select. The current melody is played for 5 seconds.
4. Press
.LWW^
or to select your preferred melody.
5. Press
8PY`
to save. You hear a confirmation tone and Saved is displayed.
6. Press and hold
8`_P
to return to standby.
Ringer volume
There are 5 different ringer volume levels to choose from.
1. Press
8PY`
to open the main menu.
2. Press
.LWW^
or until the display shows Setup h/set and press
8PY`
.
3. Press
.LWW^
or until Ring volume is displayed, press
8PY`
to select. The selected ringer melody
is played at the current volume for 5 seconds.
4. Press
.LWW^
or to select your preferred volume.
5. Press
8PY`
to save. You hear a confirmation tone and Saved is displayed.
6. Press and hold
8`_P
to return to standby.