TANDBERG C20 PLUS Conference Phone User Manual


 
What’s in this guide? Getting started Making calls Using the phone book In-call features
Advanced settings
Advanced settings
38
D1458203 USER GUIDE Profile Series, Codec C Series, Quick Set C20 / C20 Plus (TC3)—March 2010
About the advanced settings
The Advanced settings lets you define extra softbutton functions; change
the IP settings of the system; use the Advanced configuration options and
change the menu access password.
Your video system can be configured through its web interface, but it
may also be configured through the Advanced configuration. This is all
normally done by your system administrator, who may have password
protected the access to the Advanced configuration.
Do as follows:
1. Starting from the Home menu, navigate down to Settings and press the
key.
2. Then navigate to Advanced and press the key again to display the
options available (shown below).
Advanced configuration & password
The Advanced configuration is aimed at system administrators only and
may have been password protected by your system administrator. Unless
you are the system administrator you should leave these settings as they
are.
The IP settings (not shown) are also aimed at system administrators.
The Advanced configuration settings and the IP settings are described
in the Administrator Guide for your video system. This guide can be
downloaded from www.tandberg.com. Look for Support and then
Documentation.
The password may not have been set. If you decide to give your system a
password, take care. If you forget your password or otherwise forget it, contact
your TANDBERG representative for help.
The Audio input levels
menu is not available in
systems equipped with
Codec C20.