Filter
Top Products
What’s in this guide? Getting started Making calls Using the phone book In-call features
Advanced settings
Getting started
12
D1458203 USER GUIDE Profile Series, Codec C Series, Quick Set C20 / C20 Plus (TC3)—March 2010
Camera settings
Camera settings let you adjust the exposure and whitebalance.
Do as follows:
1. Press the key on the remote control to display the Layout menu.
Select Selfview to be shown as required.
2. Press the key on the remote control to display the Home menu and
select Camera control.
3. This will cause softbuttons to appear. Press the function key
corresponding to Camera settings (function key number 2 from the
left).
4. Follow the procedures outlined to the right.
Adjusting the exposure
Adjusting the whitebalance
If you change the
Brightness mode to
Manual, the Brightness
level will be possible to
set by you. Since Auto
has been chosen here,
the actual level is shown
ghosted.
Backlight compensates for any backlight shining on
the camera from behind you. Such light conditions
often make you appear darker than needed..
Since the whitebalance has been set to Manual in this case, you will have access
to setting the whitebalance in the usual manner. Use Automatic if that is more
convenient.