Filter
Top Products
What’s in this guide? Getting started Making calls Using the phone book In-call features
Advanced settings
Making calls
22
D1458203 USER GUIDE Profile Series, Codec C Series, Quick Set C20 / C20 Plus (TC3)—March 2010
Making calls by dialing the number
The term “number” has a wide definition here—you may use the
procedure outlined on this page to call people by their alphanumeric
address as well, for example:
“helen.karr@company.com”
Do as follows:
1. Key in the “number” to call. If needed, switch to alphanumeric or
numeric setting by means of the abc/123 softkey.
2. Press the softkey Special characters to access non-standard
characters, if needed. See Special characters on page 8 for more on
this.
3. Press followed by or, press twice to start calling.
Note that the system will search for matches as you write along.
Terminating an ongoing call
Terminating an ongoing call is similar to terminating calls on a cell phone—
just press the key on the remote control.
When someone is calling
Respond to an incoming call by pressing the key on the remote control
to accept it, or press the key to reject it.
Press the key on the
remote control to terminate
an ongoing call.
Press the
key on
the remote
control to reject
an incoming
call.
Press the
key on the
remote control
to answer an
incoming call.
You may alter the call rate setting before you place the call, if needed. Look for
softkey number two from the right ( ). Press the corresponding
function key to display the Call rate setting menu. Select a new setting, if required.
Press the key to produce
the call menu, if needed.
Position the cursor at Call
and press to display the
submenu.
As soon as you start to key in, the
system will look for possible matches
in the Recent calls list, My contacts,
and the Phone book.