Filter
Top Products
33
Quick Reference
PDT 8100 turns
itself off.
PDT 8100 is inac-
tive.
Your PDT 8100 turns off after a pe-
riod of inactivity. This period can be
set from one to five minutes, in
one-minute intervals. Check the
Power dialog box (in the System
tab under Start/Settings), and
change the setting if you need a
longer delay before the automatic
shutoff feature activates.
PDT 8100
doesn’t recog-
nize my handwrit-
ing.
Character strokes
written incorrectly
with the stylus.
or
Character strokes
written on the
wrong part of the
LCD screen.
or
Lower- case and
upper-case let-
ters, and numbers
written on the
wrong parts of the
LCD screen.
If you’re using the Block Recogniz-
er input method, characters must
be written a certain way. See the
PDT 8100 Product Reference
Guide for Pocket PC 2002 for infor-
mation about how to write charac-
ter strokes.
If you’re using the Block Recogniz-
er or Letter Recognizer input meth-
od, make the character strokes in
the lower character entry area on
the screen — not on the display
part of the screen.
Make sure you are writing letters
and numbers in the appropriate
section of the writing area.
Tapping the
screen buttons or
icons does not
activate the cor-
responding fea-
ture.
LCD screen not
aligned correctly.
Align the screen. Choose Align
Screen from the System tab under
Start/Settings, or hold down the
Function button and press the Ac-
tion button.
Problem Cause Solution