Filter
Top Products
38
Selectively terminating a call
1. Press the
R
key and wait for the dial tone.
2. Press the
1
key.
The active connection is terminated.
Note: To remind you of a connection that is still active, a ring signal will sound after you replace the handset (up
to three times, for a maximum of 15 seconds).
Three-way conference calling.
After you have already established one connection, you would like to accept a second, incoming call and bring the
caller into the conversation. If you wish to use this function, your telephone must have the
R
key.
Note: The telephone’s
R
key must support a hook fl ash function and have a fl ash time between 170 and
310 ms. On older phones that have no key, use the off hook key.
Establishing an additional connection
1. Press the
R
key and wait for the dial tone.
2. Enter the number you wish to call.
The fi rst connection is now inactive. The second connection has been activated.
or
Bring the incoming caller into the conversation
1. You hear the call waiting tone.
2. If you wish to accept the second call, you have 30 seconds in which to press the
R
key (hook fl ash function).
3. Press the
2
key.
The fi rst connection is on hold (inactive). The second connection is accepted (active).
sunrise surf & talk Phoning