Filter
Top Products
37
Terminating the original call
1. You hear the call waiting tone during a call.
2. If you wish to accept the incoming call, you have 30 seconds in which to terminate the fi rst call by replacing the
handset.
3. After the telephone rings, lift the handset again.
Rejecting the incoming call
1. You hear the call waiting tone during a call.
2. If you do not wish to accept the incoming call, enter the key sequence
R
0
. The call holding tone will not be
heard during the remainder of the existing call.
Holding
Putting an existing call on hold to accept a second call
1. You hear the call waiting tone during a call.
2. If you wish to accept the second call, you have 30 seconds in which to press the
R
key (hook fl ash function).
3. Press the
2
key.
The fi rst connection remains on hold (inactive). The second connection is accepted (active).
Alternating
Switching back and forth between two calls
1. Press the
R
key and wait for the dial tone.
2. Press the
2
key.
The fi rst connection is now active again. The second connection is on hold.
Flash function
Establishing another connection during a call
1. Press the
R
key and wait for the dial tone.
2. Enter the number you wish to call.
The fi rst connection is now inactive. The second connection is established.
Note: The dialing process can be terminated by pressing the
R
key repeatedly.
sunrise surf & talk Phoning