Filter
Top Products
68
Inter-Tel
®
Model 8664/8665/8668 User Guide
MOVING ON
To store a number in a Speed-Dial location:
1. While in idle mode, press to bring up the two-line display.
2. Dial .
3. Dial the speed-dial location (0-9) you want to program.
4. Enter the desired name for the speed-dial number, as described below:
• Alphanumeric mode: Press the dialpad buttons to enter the desired charac-
ters. (Refer to the chart on page 79.) The number of times a button is pressed
determines which character is entered. For example, 533266 would enter
“JEAN.” When adjoining characters are located under the same button, press
the
Fwd softkey once to advance to the next character. For example, 66 Fwd
6667776 would enter “NORM.” (Note that letters correspond to the letters
printed on dialpad buttons 2-9.) Press
Fwd twice to leave a space. Press the
Mute softkey if you need to backspace.
• Press to save the name.
5. Dial the extension number or telephone number to be stored, as described below:
• Numeric mode: Press the dialpad buttons to dial the desired numbers.
NOTE: You cannot use hyphens or colons in the telephone number. If your
number includes an asterisk, pound, hookflash, or pause, press and
use the menu options to enter the special character.
• Press to save the number.
NOTE: To dial outside telephone numbers without first selecting an outgoing line, enter
the Outgoing Call access code (default is ) before the outside telephone num-
ber.ber.
To erase a Station Speed-Dial name and/or number:
1. While in idle mode, press to bring up the two-line display.
2. Dial .
3. Dial the desired location code (0-9) you want to erase.
4. Press the Mute softkey repeatedly until the name is erased.
5. Press to continue.
6. Press Mute repeatedly until the number is erased.
7. Press to save the changes.
MENU
3 8 3
#
MENU
#
8
MENU
3 8 3
#
#