Filter
Top Products
SETUP HANDSET
To Set Contrast
1. Press MUTE/PRG button to select “CONTRAST **”.
2. Press the or button to adjust display contrast to the
desired level. The unit will show the default Time/date
eg(12:00AM 1/01).
3. Press MUTE/PRG button to confirm.
To Set Ringer On/Off
1. Press MUTE/PRG button to select “RINGER ON/RINGER
OFF”.
2. Press the or button to toggle RINGER ON and RINGER
OFF. When RINGER OFF is selected the Ringer off icon
will be displayed on the LCD.
3. Press MUTE/PRG button to confirm.
To Set Ring Tone
1. Press MUTE/PRG button to select “RING TONE A/RING
TONE B”.
2. Press the or button to toggle RING TONE A and RING
TONE B.The selected ring tone will be heard for 2 seconds.
3. Press MUTE/PRG button to confirm.
CONTRAST
RINGER ON
VOL
S
C
R
O
L
L
S
C
R
O
L
L
PROG
PROG
NOTE:
The handset will not ring when the ringer is “OFF”. If the handset is out of the cradle,
the LCD display will show “RINGING” during an incoming call.
Overview
To go to set up mode, press and hold MUTE/PRG key for 2 seconds. The following
modes will be cycled by pressing MUTE/PRG key. “CONTRAST **” “RINGER ON/OFF”
“RING TONE A/B” “AREA CODE” “TONE/PULSE MODE” “SET TIME”. To
exit setup, press MUTE/PRG key when finished.
15