Sony PEG-TJ25 PDAs & Smartphones User Manual


 
45
Sony Personal Entertainment Organizer PEG-TJ35/TJ25 3-087-353-11 (1)
Troubleshooting
My CLIÉ handheld keeps turning itself off
BYour CLIÉ handheld is designed to turn itself off after a period of inactivity (Automatic
power-off). You can set the automatic power-off time by selecting time for [Auto-off
After:] in [General] of the Preferences screen.
b For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting the automatic
power-off time” in “Handbook” (PDF format).
BDid you set [After a preset delay] from [Auto Lock Handheld:] in the Security screen?
If you set [After a preset delay] from [Auto Lock Handheld:], your CLIÉ handheld may
turn off after a shorter period even if you set the automatic power-off time.
b For details, refer to “Protecting your data with a password: Locking your CLIÉ handheld with
a password (Data protection)” in “Handbook” (PDF format).
My CLIÉ handheld does not produce any sounds
BIs [System Sound:] in [General] of the Preferences screen set to [Off]?
b For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting sounds” in
“Handbook” (PDF format).
BAdjust the volume settings in the Adjust Volume dialog box displayed by tapping
in the Status Info dialog box (page 67).
Tip
If [Muting]* is selected in the Adjust Volume dialog box, all sounds, including audio, are
muted.
* [Muting] is available for PEG-TJ35 only.
b For details, refer to “CLIÉ™ handheld components: Status Information” (page 67).
The backlight does not turn on when I adjust the
brightness level
BIf the brightness is set to the lowest level, the display may be illegible. However, this
is not a malfunction.
The LCD display cannot be viewed properly
BDepending upon the angle of vision, the brightness may be uneven, however, this is not
a malfunction. You can adjust the brightness level in the Adjust Brightness dialog
box displayed by tapping (page 65) at the bottom left of the Graffiti 2 writing area.
If the backlight is off, you can turn it on by sliding down the POWER/HOLD switch
and hold it for more than two seconds.
Continued on next page
• • • • • • • • • • • • • • • • • • • • •