Filter
Top Products
DR-BT160iK_CED [US, ES] 4-108-812-42(1)
2120
US US
DR-BT160iK_CED [US, ES] 4-108-812-42(1)
2120
US US
Controlling an iPod with the headset
You can control an iPod (see page 4 for compatible iPod models)
using the control button of the headset.
Before starting remote control operation, check that step 1 and 2 of
“Listening to music of the iPod” are completed (page 18).
Remote control
(playback, pause, etc.)
Bluetooth headset
Transmitter
Control for the iPod
You can playback or pause the iPod by pressing the button on
the headset.
You can turn o the iPod and transmitter by pressing and holding
the button on the headset for more than 2 seconds.
Control music
You can skip forward or backward each song on the iPod by pressing
the / button. You can also fast-forward or fast-rewind
songs by holding down the / button.
Notes
Even if you control the volume on the iPod, the volume of the headset does not
change.
When operating the iPod by remote control, do not cover the transmitter with
your hands, etc.
You may need to press the play/pause button twice depending on the Bluetooth
receiving device.
You may need to press the play/pause button of the Bluetooth receiving device
twice when you operate the button on the iPod.
Operation of the iPod with the transmitter by the Bluetooth receiving device will
vary depending on the Bluetooth receiving device’s specication.
When the iPod is playing a video or photo, remote control operation may
become unstable.
Tip
When you press the pause button on the
Bluetooth receiving device, the iPod goes
to pause mode for 10 minutes and the iPod
backlight is turns on and o at interval.
•
•
•
•
•
•
Do not cover the
transmitter with hands.