Sony DR BT160IK Bluetooth Headset User Manual


 
DR-BT160iK_CED [US, ES] 4-108-812-42(1)
2524
US US
DR-BT160iK_CED [US, ES] 4-108-812-42(1)
2524
US US
Continued
e headset indicator ashes quickly: Pairing in process
e headset indicator ashes (at about 1-second intervals) when
responding to the Bluetooth transmitting device: Connectable
(Pairing successful)
e headset indicator ashes (at about 5-second intervals):
Connected
Note
Passcode* of the headset is xed at “0000.” Depending on the Bluetooth
receiving device, it may be necessary to input the passcode (in this case,
“0000”). e headset cannot be paired with a Bluetooth receiving device
whose passcode is not “0000.”
* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”
When not completed pairing
Repeat the procedure from step
2
.
To quit “Pairing in process”
Press and hold the POWER button of the headset for about 3 seconds to turn o
the headset.
Note
For using the Bluetooth function, it is required that the Bluetooth device on the
other side is corresponding with the same prole as the headset. However, even if
it is corresponding with the same prole, the function may dier depending on the
specication of the Bluetooth device.