Filter
Top Products
E10
GETTING
STARTED
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone
directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into
the wall.
• Try to mount your phone within 5 feet of a working phone jack to
avoid excessive cable lengths.
• Make sure the wall material is capable of supporting the weight of
the base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring
devices suitable for the wall material where the base unit will
be placed.
1 Insert two mounting screws into the wall,
(with their appropriate anchoring device),
3-15/16 inches apart.
Allow about 1/8 of an inch between the
wall and screw heads for mounting
the phone.
2 Refer to steps 1 through 6 on page E9 to
mount the telephone.
UP015DH(CLT5810) ENG OM 3/9/05 10:36 AM Page 10