Filter
Top Products
• After installing the battery pack in the handset, charge your
handset at least 15-20 hours before plugging into the phone line.
4 Place the handset in the base unit for
15-20 hours without interruption. The
base unit’s LED light (labeled CHARGE/
IN USE) illuminates once the handset is
placed in the base. The LED light will
illuminate whether the battery pack is
connected or not.
If the base CHARGE/IN USE LED light
does not illuminate:
• Check to see if the AC adapter is
plugged into the base unit and the
electrical wall outlet properly. (Use
only the supplied AC adapter. Do not
use any other AC adapter.)
• Check to see if the handset is sitting
correctly in the base and making good
contact with the base unit’s charging contacts.
5 Once the handset battery pack is fully
charged, connect the telephone line cord
to the TEL LINE jack and to a
telephone outlet.
E8
GETTING
STARTED
If your telephone outlet isn't modular, contact your
telephone company for assistance.
Tip:
Modular
UP015DH(CLT5810) ENG OM 3/9/05 10:36 AM Page 8