Filter
Top Products
E9
GETTING
STARTED
Mounting the base unit on a wall
DO NOT use an AC outlet controlled by a wall switch.
IMPORTANT
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1 Plug the AC adapter into
the DC IN 9V jack.
2 Wrap the AC adapter cord
inside the molded wiring
channel as shown.
3 Plug the AC adapter into
a standard 120V AC
wall outlet.
4 Plug the telephone line
cord into the TEL LINE
jack. Wrap the cord inside
the molded wiring channel
as shown.
5 Plug the telephone
line cord into the
telephone outlet.
6 Align the mounting slots on the base with the mounting posts
on the wall. Then push in and down until the phone is
firmly seated.
UP015DH(CLT5810) ENG OM 3/9/05 10:36 AM Page 9