Filter
Top Products
[CALL FROM 203], [TRSF TO 202], [701 RINGING], [TRANSFER FM
203], [708 busy], [Camp on to 204], [Recall from 204 ], [Call for 501],
[message frm 204] and [FWD ALL to 204] keep you informed of what
is happening and where you are. In some conditions you are
p rompted to take an action and in other cases you receive dire c t o r y
i n f o r m a t i o n .
DISPLAY NUMBER DIALLED
Display keysets begin showing digits as they are dialled. They will
stay in the display until the call duration timer comes on automatically
or the TIMER button is pressed. If the call duration timer is not used,
the number dialled is displayed until the call is released, transferred or
put on hold.
CALL DURATION TIMER
The system can be set to automatically time outside calls. A few
seconds after you dial a telephone number, the timer will appear in the
d i s p l a y. It appears immediately for incoming calls. The call timer
continues for the duration of the call. The call timer continues for the
duration of the call. Call duration times are displayed in minutes and
seconds. If a call lasts longer than 99 minutes, the timer re s t a r t s .
You can press the TIMER key to manually begin timing a call. Press it
again to stop timing. If you press it while automatic timer is on, the call
duration time is re s t a r t e d .
AUTO TIMER
Display keyset users may have the timer automatically start when they
answer incoming calls or after a short delay on an outgoing call.
• With the handset on-hook, press TRSF and then dial 11 0 .
• Dial 11 to turn the auto timer on or 10 to turn it off .
• Press TRSF to store your selection.
46
≈∞∆˘ 99.1.20 2:58 PM ∆‰¿Ã¡ˆ46