Filter
Top Products
6
SETUP
The telephone will prompt the initial setup after the 9V battery or AC
power supply is connected. The initial setup procedure needs to be
completed with the phone ”on-hook“, which means that the phone line is
inactive (the handset in the cradle and the SPEAKER function off). Do not
pick up the handset or press the SPEAKER button during the setup.
After the initial setup, you can use these same procedures to adjust any of
the menu settings by first pressing the MENU button and then using the
REVIEW buttons to select the menu item you want to adjust. (During the
initial setup you are automatically taken to the next step.)
SET
TIME
STEP 1: SETTING THE TIME
1. Press the MENU button.
After the initial setup, the display will
show the current time.
2. Press the STORE button.
STORE appears in the display.
3. Use the keypad to enter the correct hour
(it must be a two-digit entry, i.e. 07).
4. Use the keypad to enter the correct
minutes (it must be a two-digit entry).
5. Press 1 for AM, or 2 for PM.
6. Press STORE within 15 seconds to save
the time and go to the next step.
ENTER
HOUR
_ _
:
_ _STORE
➔
STORE
ENTER
MINUTE
07:
_ _
➔➔
07:15
STORE
ENTER
AM
=
1
PM
=
2
➔
07:15
AM
STORE
SAVE
TIME
07:15
AM
SET
DATE
10/
_ _
07:15
AM
STORE
ENTER
MONTH
➔➔
07:15
AM10/22
STORE
ENTER
DATE
10/22 07:15
AM
STORE
SAVE
DATE
➔
STEP 2: SETTING THE DATE
1. Press the STORE button.
2. Use the keypad to enter the month (it
must be a two-digit entry).
3. Use the keypad to enter the date (it must
be a two-digit entry).
4. Press STORE within 15 seconds to save
the date and go to the next step.