Filter
Top Products
15
MEMORY DIALING
Each of the 10 memory buttons is capable of storing two separate phone
numbers that are up to 31 digits. Each MEMORY button accesses an upper
and a lower memory position. You can dial the phone numbers stored in
the upper position with one touch (press the MEMORY location button).
You can dial the phone numbers in the lower memory position by pressing
two buttons (SHIFT and the MEMORY location button).
Note that if no keys are pressed for 15 seconds, the Memory feature
automatically turns off.
STORE
button
FLASH
PAUSE ALARM
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
TONE
0
OPER
#
SPEAKER
- VOL +
MUTE
MENU
BUSY/REDIAL
DN DISTURB
HOLD
STORELOWER
NEW
CALL
REVIEW DIALDELETE
CALLER ID
MEMORY locations
SHIFT
button
STORING A NUMBER IN
MEMORY
1. Press the STORE button.
2. Dial the number to be stored (up to
31 digits).
The number digits scroll from right
to left across the display.
3. Press the STORE button again.
4. Press a MEMORY location button
or
Press SHIFT and then a MEMORY
location button to store the number.
5. Remove the memory directory from
underneath its plastic cover and
record the name of the person
whose number you stored.
INSERTING A PAUSE IN THE DIALING
SEQUENCE
Press the PAUSE button to insert a
delay in the dialing sequence of a
stored telephone number when a pause
is needed to wait for a dial tone (for
example after you dial 9 for an outside
line, or to wait for a computer access
tone). Each pause counts as 1 digit in
the dialing sequence.
10/22 07:15
AM
ENTER
NUMBER
STORE
10/22 07:15
AM
ENTER
DIGITS
STORE
555-1234
➔