Filter
Top Products
13
TEMPORARY TONE
If you have Pulse (rotary) service, and want to access customer calling
services that require Tone dialing (such as getting information from a local
bank), you can use this feature.
1. Press the TONE button ( * ) after you have connected to the customer
calling service to enable Tone dialing.
2. When you hang up, the phone automatically resumes Pulse dialing.
FLASH BUTTON
Press the FLASH button to activate customer calling services such as call
waiting or call transfer, which are provided by your local phone company.
Do not use the hook switch or the speaker button because you might hang
up the phone.
ADJUSTING THE FLASH BUTTON TIMING
If you have trouble getting the FLASH
button to work properly, you might need to
adjust the amount of time that the FLASH
button is active. The FLASH default time is
.6 seconds. To adjust the time:
10/22 07:15
AM
FLASH
=
.6
10/22 07:15
AM
PAUSE
=
2
1. Press the STORE button.
2. Press a number key (1-9) to adjust the length
of time that the FLASH button is active (from .1 to .9 seconds).
3. Press the STORE button.
4. Press the FLASH button.
PAUSE BUTTON
When you store phone numbers in memory,
you might need to insert a delay in the dialing,
for example when you must dial 9 to get an outside line. Press the PAUSE
button at the point in the dialing sequence that requires the delay.
ADJUSTING THE PAUSE BUTTON TIMING
If you have trouble getting the PAUSE button to work properly, you might
need to adjust the amount of time that the PAUSE button is active. The
pause default time is AUTO TONE DETECT. To adjust the time:
1. Press the STORE button.
2. Press a number key (0-9) to adjust the length of the delay caused by the
PAUSE button (AUTO TONE DETECT to 9 seconds.)
3. Press the STORE button.
4. Press the PAUSE button.