Filter
Top Products
26
DIALING NUMBERS FROM
A CALLER ID RECORD
To dial a local number stored in a Caller
ID record, recall the record, then press
TALK
. If it is a long distance call, press
1
before you press
TALK
.
Note: If a Caller ID record does not con-
tain a phone number (if it was blocked
by the caller, for example) you cannot
dial from that record.
STORING A CALLER ID
RECORD TO MEMORY
Follow these steps to store the name
and number from a Caller ID record into
a handset’s memory location.
1. Recall the record you want to store,
then press
MEM
. Select Loca-
tion
appears.
2. Choose a memory location (01–20)
by pressing a number or by repeat-
edly pressing or , then press
SELECT
.
If the selected location is empty, the
phone beeps to confirm that it
stored the number, then the Caller
ID record appears. If a record exists
in the selected location,
Replace
Memory?
appears, prompting you
to confirm the replacement. Move
the cursor to
Yes or No, then press
SELECT
.
DELETING CALLER ID
RECORDS
You can delete Caller ID records individ-
ually or all at once.
To delete a single record, recall it, then
press
DEL/CH
. Delete Message? ap-
pears, prompting you to confirm the de-
letion. Move the cursor to
Yes or No,
then press
SELECT
or
DEL/CH
.
Unknown
Name
or
Unknown
Number
The caller is not
within a Caller ID
service.
Incomplete
Data
Appears if there was
an error during the
transmission of
Caller ID informa-
tion. Minor electrical
disturbances can
affect Caller ID infor-
mation. Occasional
errors are normal. If
the phone fre-
quently displays
Incomplete
Data
, contact your
local telephone com-
pany or RadioShack
store for assistance.
End
Appears when you
scroll past the oldest
Caller ID record.
Display Description