Filter
Top Products
14
SETTING AUTO TALK
Your phone is preset so you must press
TALK
to answer a call. With auto talk
turned on, you can answer a call by just
lifting the handset from the base, or, if
the handset is away from the base, by
pressing any key.
Follow these steps to turn auto talk on or
off.
1. Lift the handset and hold down
CALL
ID
until Caller ID Setup
appears on the display with Auto
Talk
selected.
2. Press
SELECT
to change the auto
talk setting.
On or Off appears indi-
cating the selected setting.
3. To clear the display when you finish,
press
CALL ID
or return the handset
to the base.
TURNING CALL WAITING/
CALLER ID ON/OFF
If you have Call Waiting with Caller ID
service, you can set the TAD-729 to
show Caller ID information for an incom-
ing call even while you are already on
the phone.
Follow these steps to turn the Caller ID/
Call Waiting feature on or off.
1. Lift the handset and hold down
CALL ID
until Caller ID Setup
appears on the display with Auto
Talk
selected.
2. Press
2
or to select CIDCW
(Caller ID/Call Waiting).
3. Press
SELECT
to change the Caller
ID/Call Waiting setting.
On or Off
appears indicating the selected set-
ting.
4. Press
CALL ID
then return the hand-
set to the base to store the new set-
ting.
STORING YOUR AREA
CODE
To quickly dial a number from a Caller
ID record (see “Dialing Numbers from a
Caller ID Record” on Page 26) or to cor-
rectly store a number from a record into
a memory dialing location (see “Storing
a Caller ID Record to Memory” on
Page 26), you must store your local area
code in the TAD-729’s memory. Then,
when you dial from a Caller ID record,
the TAD-729 skips the area code if it
matches the one you stored.
Follow these steps to store your area
code.
1. Lift the handset and hold down
CALL
ID
until Caller ID Setup
appears on the display with Auto
Talk
selected.
CALL ID
SELECT