Radio Shack TAD-729 Cordless Telephone User Manual


 
16
TELEPHONE OPERATION
Note: To use the speakerphone, you
must use the base keypad; to use the
handset, you must use the handset key-
pad.
MAKING AND RECEIVING
A CALL
Using the Handset
To make a call, lift the handset and
press
TALK
. TALK appears on the
handset's display and the CHARGE/IN
USE indicator on the base light. Dial the
number. You see the number as you di-
al, then (after a few seconds) the call’s
elapsed time.
Note: You can also dial the number be-
fore you press
TALK
. If you make a mis-
take, repeatedly press
DEL/CH
to erase
up to the wrong entry, then enter the
correct number. You can also press and
hold
DEL/CH
for more than one second
to delete the entire number.
To answer a call, lift the handset from
the base and press
TALK
. If auto talk is
on, just lift the handset from the base or
press any key to answer a call.
To end a call, place the handset on the
base or press
TALK
.
Using the Speakerphone
To make or answer a call using the
speakerphone, simply press
SPEAKER
.
The SPKR/MUTE indicator lights. Use
the base’s keypad to dial the desired
number.
To adjust the speakerphone’s volume,
repeatedly press
VOL
. or . on the
base. The volume setting from
1 (low-
est) to
10 (highest) appears in the mes-
sage counter window.
To end a speakerphone call, press
SPEAKER
again. The SPKR/MUTE indi-
cator turns off.
TALK
DEL/CH
SPEAKER
VOL