Filter
Top Products
20
To transfer a call from the handset to the
base, press
INTCM
. The call is placed on
hold. When the person at the base an-
swers, press
TALK
. The call is released
from hold and transferred to the base.
To bring the handset back into the con-
versation for a 3-way conference, press
TALK
again.
To transfer a call from the base to the
handset, press
INTERCOM
. The call is
placed on hold. When the person with
the handset answers, press
SPEAKER
.
The call is released from hold and trans-
ferred to the handset. To bring the base
back into the conversation for a 3-way
conference, press
SPEAKER
again.
USING A HEADSET
You can talk with hands-free conve-
nience using an optional headset that
has a
3
/
32
-inch (2.5-mm) plug. Contact
your local RadioShack store for a suit-
able headset.
To connect the headset, open the rub-
ber cover marked on the side of the
handset, then insert the headset’s plug
into the jack.
Notes:
• Connecting a headset disconnects
the handset’s earpiece and micro-
phone.
• or on the handset also controls
the connected headset’s volume.
• If you place the handset on the base
to recharge it while the headset is
connected, be sure the handset
seats properly.
With a headset connected, you make or
answer calls as usual using the keys on
the handset. You can also make or an-
swer calls by pressing the
SPEAKER
button located on the base.
You can use a handset holder (available
from your local RadioShack store) to
hang the handset on your belt for great-
er convenience.
When you finish using the headset, dis-
connect it from the handset and close
the rubber cover to protect the jack.