Filter
Top Products
19
3. When the service answers, press
TONE
( ) on the handset. Any addi-
tional numbers you dial are sent as
tone signals.
4. When you hang up, the phone auto-
matically resets to pulse dialing.
USING PAGE/INTERCOM
You can use the TAD-729 as a two-way
pager and intercom between the base
and the handset. This is useful if the
handset is away from the base and you
want to locate it, or if you want to have a
conversation between someone with the
handset and someone at the base.
To page the base from the handset,
press
INTCM
. The base and handset
ring. Press
SPEAKER
or
INTERCOM
on
the base to answer the page.
To page the handset from the base,
press
INTERCOM
. The handset and
base ring. Press
TALK
or
INTCM
on the
handset to answer the page.
In either case, if the called party does
not answer within 1 minute, the paging
stops. Press
INTCM
or
INTERCOM
again
to re-start paging.
To end an intercom call, press
TALK
on
the handset, press
SPEAKER
on the
base, or hang up the handset.
If a call comes in during an intercom
conversation, only the base rings but
person at the handset can also hear the
ring through the intercom. Either person
can answer the call. Press
TALK
or
SPEAKER
once to end the intercom call,
then press
TALK
or
SPEAKER
again to
answer the call.
Note: The intercom does not operate if
the party being paged is already on a
call.
TRANSFERRING A CALL
BETWEEN THE HANDSET
AND BASE
You can use the TAD-729's intercom
feature to transfer a call between the
handset and the base.
TONE
INTERCOM INTCM