Filter
Top Products
29
The TAD announces “You have xx
new message(s)” (where xx is the
numbers of messages) or “You have
no messages”, then the TAD plays
back the recorded messages contin-
uously. When you have both old and
new messages, the TAD first plays
back only new messages. Press
8
to
hear old messages.
3. During playback, you can press the
number key for the command you
want.
After all messages have been played
back (or you finished playing back by
pressing ), you can continue to ac-
cess other features.
To record a new outgoing message:
1. Press
1
twice within 2 seconds. The
TAD beeps.
2. Record your new outgoing mes-
sage.
3. Press
1
or . A beep sounds and
the recorded outgoing message
plays back.
To record a memo:
1. Press
3
. The TAD beeps.
2. Record your message.
3. Press
3
. The TAD beeps and the
recorded memo plays.
To listen to help guidance:
Press
and the TAD plays a
series of
voice prompts to guide you through re-
mote operation.
To set the TAD to answer/not answer
calls:
Press
4
. The TAD announces the cur-
rent outgoing message or “Answer off.”
Repeatedly press
4
during outgoing
message playback to turn the TAD on
and select between the prerecorded or
your own message, or turn the TAD off.
You hear “Answer off”.
Press:
To:
7
Skip to the previous
message.
8
Repeat the current
message.
9
Skip to the next mes-
sage.
Stop message play-
back.
0
twice within
2 seconds
Delete the current mes-
sage.
43-727.fm Page 29 Monday, December 20, 1999 4:28 PM