Filter
Top Products
16
TELEPHONE OPERATION
MAKING AND RECEIVING
CALLS
To make a call, lift the handset and
press
TALK
. When you hear the dial
tone, dial the number.
To answer a call, just lift the handset
when the handset is on the base or
press any key on the handset when it is
off the base.
Both the IN USE/CHARGE indicator on
the base and the TALK/LOW BATT indi-
cator on the handset flash when you re-
ceive a call.
To end a call, place the handset on the
base or press
TALK
so the TALK/LOW
BATT indicator on the handset turns off.
OUT OF RANGE SIGNAL
If you move the handset out of the
base's range while a call is in progress,
three beeps sound through the earpiece
every four seconds. Return to within the
base's range within 40 seconds, then
the out of range signal stops, and you
can resume your phone conversation.
If you keep the handset out of the base's
range for 40 seconds or more, the call is
disconnected.
ADJUSTING THE
HANDSET VOLUME
The handset's
VOLUME
control lets you
set the volume you hear through the
handset to one of four levels.
To turn the volume up or down during a
call, repeatedly press
VOLUME
or
on the handset. The TAD-727 beeps
once each time you press
VOLUME
or . When you reach the highest or
lowest volume level, the TAD-727 beeps
three times.
USING REDIAL
You can quickly dial the last number di-
aled. Lift the handset and press
TALK
,
then press
REDIAL
.
Notes:
• The redial memory holds up to 32
digits, so you can redial long dis-
tance as well as local numbers.
• The redial memory also holds pause
entries. See “Entering a Pause” on
Page 19.
43-727.fm Page 16 Monday, December 20, 1999 4:28 PM