Filter
Top Products
27
While playing back the messages,
PL
(playback) and the number of the cur-
rent messages flash on the display. For
example, if you have a total of four mes-
sages (one old, three new), pressing
PLAY/REPEAT/
displays
2
(the first
new message).
If there are no messages when you
press
PLAY/REPEAT/
or
PLAY/RPT/8
,
the TAD announces “You have no mes-
sages.”
Notes:
• If the TAD detects a busy signal for
more than 5 seconds or silence for
more than 8 seconds while record-
ing a message, it stops recording
and releases the call.
• When you play back messages
using handset, the message num-
ber does not appear on the display.
To skip to the next message, press
SKIP
(or
SKIP/9
on the handset).
To skip to the previous message, press
PREVIOUS
(or
PREVIOUS/7
on the hand-
set).
To play the current message again,
press
PLAY/REPEAT/
(or
PLAY/RPT/8
on the handset).
To stop playback before the end of the
messages, press
STOP
(or
STOP/HELP/
TONE
on the handset).
DELETING MESSAGES
To delete the current message, press
DELETE
, on either the handset or base,
until a beep sounds at any time during
playback.
To delete all messages at once, while
messages are not playing, hold down
DELETE
on the base until the TAD
beeps 3 times. After all messages have
been deleted, the TAD announces “You
have no messages.”
ADJUSTING THE TAD'S
VOLUME
You can adjust the playback volume
with the
VOLUME
control, located on the
right side of the base, during message
playback or call screening.
PREVIOUS/7
DELETE
V
O
L
U
ME
43-727.fm Page 27 Monday, December 20, 1999 4:28 PM