Filter
Top Products
17
USING FLASH
Flash performs the electronic equiva-
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
For example, if you have Call Waiting,
press
FLASH
to answer an incoming call
without disconnecting the current call.
Press
FLASH
again to return to the first
call.
Note:
If you do not have any special
phone services, pressing
FLASH
might
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse dialing, you can still use
these special tone services by following
these steps.
1. Be sure
PULSE/TONE
is set to
PULSE
.
2. Dial the service's main number.
3. When the service answers, press
TONE
. Any additional numbers
you dial are sent as tone signals.
4. After you complete the call, return
the handset to the base or press
TALK
. The phone automatically
resets to the pulse mode.
USING THE INTERCOM
You can use the TAD-727 as a two-way
pager and intercom between the base
and handset. This is useful if the hand-
set is away from the base and you want
to locate it, or if you want to have a con-
versation between someone with the
handset and someone at the base.
Note:
If a call comes in during an inter-
com conversation, the person using the
handset can answer the call by pressing
TALK
, but the intercom call is discon-
nected.
43-727.fm Page 17 Monday, December 20, 1999 4:28 PM