Filter
Top Products
22
2. Repeatedly press
PREVIOUS
or
SKIP
on the base until the TAD
announces and displays the number
of rings you desire – “two” so the
TAD answers on the second ring,
“five” for fifth ring, or “toll saver”
when you want to use the toll-saver
function.
3. Press
ANSWER
or
PLAY/REPEAT/
. The TAD sounds a long beep
and announces the selected num-
ber of rings.
Note:
Press each button within 30 sec-
onds. If you take longer, the setting pro-
cedure is canceled automatically.
SETTING THE DAY
AND TIME
You must set the day and time so the
TAD can record the correct day and time
of each message.
1. Hold down
STOP
on the base until a
long beep sounds. The TAD
announces the day of the week.
CL
flashes on the digital display.
2. Press
PREVIOUS
or
SKIP
until the
TAD announces the correct day of
the week.
3. Press
PLAY/REPEAT/
.The TAD
announces the hour and “AM” or
“PM.”
4. Press
PREVIOUS
or
SKIP
until the
TAD announces the correct hour,
including AM or PM.
5. Press
PLAY/REPEAT/
.The TAD
announces the minute.
6. Press
PREVIOUS
or
SKIP
until the
TAD announces the correct minute.
Holding down
PREVIOUS
or
SKIP
advances the minute rapidly and
announces minutes in 10 minute
increments. Release
PREVIOUS
or
SKIP
and the TAD announces the
minute setting. If you advance too
far when holding down
PREVIOUS
or
SKIP
, press the opposite button.
7. Press
PLAY/REPEAT/
. The TAD
announces the minute and sounds a
beep. Then the seconds start to
count from 0.
SKIP
PLAY/
REPEAT
PREVIOUS
STOP
43-727.fm Page 22 Monday, December 20, 1999 4:28 PM