Filter
Top Products
24
Caller ID Operation
To review the VIP call records, press
VIP
,
then repeatedly press
:
::
:
/
8
88
8
or
9
99
9
/
;
;;
;
.
To delete a VIP call record, recall the desired
VIP call record, then press
DELETE
.
Note:
The selected VIP call disappears from
the VIP Call List when you delete it. The VIP
mark still remains on the call when you re-
view the Caller ID memories. The VIP mark
on the VIP call does not disappear unless
you remove that call record.
To call a phone number on the VIP Call List,
recall the desired VIP call number, then
press
DIAL
.
Setting the VIP Alert
Note:
When you first connect the AC adapt-
er, the VIP alert automatically turns on, and
appears.
1. Hold down
STOP
until the TAD beeps.
2. Repeatedly press
DIAL
until
VIP
ALERT
ON
appears.
3. Press
:
::
:
/
8
88
8
to turn off the VIP alert.
disappears and
VIP
ALERT
OFF
appears. To turn on the alert, press
:
::
:
/
8
88
8
.
VIP
ALERT
ON
and appear.
4. Press
STOP
to return to the time display.
Dialing Number Selections
VIP also provides dialing options for different
phone systems allowing you to select the
correct dialing selection for a phone number
before you press
DIAL
.
Different Area Code
When the phone number's area code does
not match the area code you stored, the TAD
provides two different dialing number selec-
tions. Press
VIP
once, the display first shows
the ten-digit number (three digits of the area
code plus seven digits of the phone number,
for example,
8185551212
). Press
VIP
again and
1
appears before the ten-digit
number (
18185551212
).
Same Area Code
If the phone number's area code matches
the area code you stored, the TAD provides
four different numbers. Repeatedly press
VIP
, the TAD cycles through and displays
four patterns for dialing numbers.
• Seven-digit number — for example,
5551212
.
• Eight-digit number (“1” plus the phone
number) — for example,
15551212
.
• Ten-digit number — for example,
8175551212
.
• Eleven-digit number (“1” plus the area
code plus the phone number) — for
example,
18175551212
.
Using Dial
You must store your home area code for
Callback to work correctly (see “Setting the
Area Code” on Page 9). If the call came from
your home area code, the display shows only
the seven-digit number (without an area
code). Follow these steps to dial a phone
number from Caller ID records.
1. Repeatedly press
:
::
:
/
8
88
8
or
9
99
9
/
;
;;
;
to
select the desired phone number.
2. Then, repeatedly press
VIP
to select the
suitable dialing pattern for that phone
number (see “Dialing Number Selec-
tions” on Page 24).
43-705.fm Page 24 Tuesday, May 23, 2000 8:54 AM