Filter
Top Products
12
Telephone Operation
USING REDIAL
The redial memory holds up to 32 digits, so it
can store long-distance as well as local num-
bers. To redial the last number you dialed, lift
the handset then press
REDIAL
.
REDIAL..
appears.
Notes:
• The redial memory stores the first 32
digits of any number dialed. If the num-
ber you dialed exceeds 32 digits, the
redial memory does not store the num-
ber.
• When you redial a phone number that
includes a flash entry, the TAD only redi-
als the numbers you pressed before
FLASH
.
USING FLASH
Use
FLASH
to perform the switchhook opera-
tion for special services, such as Call Wait-
ing.
For example, if you have Call Waiting, press
FLASH
to take an incoming call without dis-
connecting the current call. Press
FLASH
again to return to the first call.
Note:
If you do not have special phone ser-
vices, pressing
FLASH
might disconnect the
current call.
USING HOLD
To put a caller on hold, press
HOLD
. The
TAD beeps,
==
HOLD
==
appears, and the
HOLD/ANSWER indicator flashes. You can
now hang up the handset without discon-
necting the call.
To resume the call, press
HOLD
again if the
handset is not on the base, or lift the handset
if the handset is placed on the base, or pick
up any extension phone on the same line. If
you put a call on hold while using the speak-
erphone, press
HEADSET/SPEAKERPHONE
or
HOLD
to release the call.
Note:
The TAD will not show Caller ID infor-
mation for an incoming call while another call
is on hold.
USING PRIVACY
To talk to someone else in the room without
the person on the other end of the phone line
hearing you, press
PRIVACY
. The TAD
beeps, and
==
PRIVACY
==
displays.
Press
PRIVACY
again to resume your conver-
sation. The TAD beeps and
==
TALK
==
ap-
pears.
USING TONE SERVICES ON
A PULSE LINE
If you have pulse service, you can still use
special services that require tone signals,
such as bank-by-phone, by following these
steps.
1. Be sure
T/P
is set to
P
.
2. Dial the service's main number.
3. When the service answers, press ,
appears; or press
#
, appears.
Any additional numbers you dial are
sent as tone signals.
4. After you complete the call and hang up,
the TAD resets to pulse dialing.
MEMORY DIALING
You can store up to 12 numbers in memory
and dial any stored number by pressing one
key. Each stored number can be up to 16
digits long.
43-705.fm Page 12 Tuesday, May 23, 2000 8:54 AM