Filter
Top Products
21
Caller ID Operation
ˆ
Caller ID Operation
If you subscribe to Caller ID service from
your phone company, the phone automati-
cally displays the information the phone com-
pany sends between the first and second
rings of every call you receive. It stores up to
62 numbers only or name and number call
records in its Caller ID memory.
It also shows the date and time the call was
received. The display also shows if caller in-
formation is not available or if the sender
chose not to send the information (see “Call-
er ID Messages” on Page 22).
The NEW CALL indicator flashes during an
incoming call,
RING
and the Caller ID record
appear on the display. Then the total Caller
ID record appears after the last ring stops for
about 8 seconds.
If you subscribe to your phone company's
message waiting service, your TAD informs
you when you have a message waiting. If
MESSAGE
WAITING
and appear, you
have a voice message in your mailbox.
MESSAGE
WAITING
disappears from the
display after 8 seconds, but flashes until
you retrieve the message.
Note:
The message waiting feature does not
work with stutter dial tone service.
If your phone company sends information in-
dicating that the incoming call is long dis-
tance,
LDC
appears.
If you receive more than one call (without an
accompanying message) from the same
phone number,
RPT
(repeat) appears, and
the TAD stores a single Caller ID record for
that number with the date and time of the last
call. If the later repeat call has a message
but the previous call does not, the TAD
stores the later call as a repeat call record,
and
RPT
appears.
If the previous call has a message but the
later repeat call does not,
RPT
appears, and
the TAD stores both Caller ID records. If both
of the later and previous calls have messag-
es,
RPT
appears, and the TAD stores both
calls’ information.
If only Caller ID records (or both of incoming
messages and Caller ID records) are full, the
TAD announces “Memory is full”, and
xx
CALLS
xx
MSG
FULL
appears. The TAD
answers calls after 3 rings and plays the sec-
ond outgoing message (OGM 2). If no OGM
2 is recorded, the TAD says “Memory is full.
Thank you for your call.”
43-705.fm Page 21 Tuesday, May 23, 2000 8:54 AM